SNMA Carbide inserts
Size :
SNMA120402
SNMA120404
SNMA120408
SNMA120412
SNMA120416
SNMA120606
SNMA150608
SNMA190612
SNMA190616
Grade
WB2015
Adopted with Co-structure substrate ,wb2015 is optimized for excellent toughness and wear resistance ,it is the best option in p15 area without cutting fluid and suitable for semi-finishing and finishing ISO P,K and M materials
WB2025
Adopted with Co-structure ,wb2025 is optimized for the best combination of toughness and wearing resistance ,it's wide range applicative and suitable for semi-finishing and finishing ISO P material .
WB2115
Adopted with thick TiCN and thick AI2O3 coating ,wb2115 is the best option for semi-finishing and fininshing ISO P material ,and optimized contracting with prime grade ,the cutting speed can be increased over 25% and the flank wear can be decreased 30% in same cutting speed .
WB2125
Adopted with thick TiCN and thick AI2O3 coating ,wb2125 is optimized for blade intensity and resisting plastic deformation ,it is the preferred option in semi-finishing and finishing ISO P material ,
wb2125 can be worked stably in high removal rate cutting parameters and serious worked stably in high removal rate cutting parameters and serious work conditions ,besides ,it's qualified in cutting without cutting fluid ,in addition ,the cutting speed can be increased over 25% in same cutting condition ,the tool life can be extended 50% in the same cutting speed .
WB2215
Suited for semi-finishing and finishing ISO P material
It contains high plastic deformation capacity substrate and hard-wearing CVD coating ,which makes it is suitable for steel finishing at high-speed cutting ,the golden appearance is easy to be found the wear .
WB2225
Suited for ISO P material
It contains gradient-based structural substrate and hard-wearing CVD coating ,combines both favorable toughness and wearing resistance , which makes it is suitable for steel processing ,the golden appearance is easy to be found the wear .
WB3105
Hard substrate perfectly combined with ultra thick TiCN and AI2O3 WB 3105 is optimized for the best wear resistance ,chemical wear resistance and heat-insulating capability ,it can realizehigh-speed ,high-efficiency and environmental cutting.
WB3115
Hard substate perfectly combined with ultra thick TiCN and AI2O3 WB3115 Is optimized for excellent spalling resistance ,it is suitable for medium and high-speed cutting in cast iron , besides slight interrupted turning ,it also has versatility in milling .
WB3115D
Mild-coarse grain substrate combines with hard-wearing and ultra thick alumina CVD Coating ,wb3115 ,it is preferred in low-medium speed turning in gray iron .
WB3115S
General cast iron grade ,highly hard and wearable substrate coated by thick CVD coating ,wb3115 has excellent toughness and wear resistance properties ,particulary for medium and high-speed cutting .
